CrystaLex™

Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Suspendisse ut libero augue. Maecenas feugiat, nulla eget maximus elementum, odio augue placerat est, nec semper nisl erat ac ex el convallis ligula commodo ac. Aenean congue. Nunc eu tellus pellentesque!

Tristique senectus et netus et malesuada fames ac turpis egestas ulla! Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Suspendisse ut libero augue.

Maecenas feugiat, nulla eget maximus elementum, odio augue placerat est, nec semper nisl erat ac ex el convallis ligula commodo ac. Aenean congue. Nunc eu tellus pellentesque!

Tristique senectus et netus et malesuada fames ac turpis egestas ulla!

PolyStone Products Technical Information
PropertyTypical ResultTest
Tensile Strength6,000 psiASTM D 638
Tensile Modulus1.5 x 10^6 psiASTM D 638
Tensile Elongation0.4% min.ASTM D 638
Flexural Strength10,000 psiASTM D 790
Flexural Modulus1.2 x 10^6 psiASTM D 790
Hardness>85 56Rockwell “M” Scale ASTM D 785 Barcol Impressor ASTM D 2583
Thermal Expansion3.02 x 10-5 in./in./°C (1.80 x 10-5 in./in./°F)ASTM D 696
Gloss (60° Gardner) 5–75 (matte—highly polished)ANSI Z124
Light Resistance (Xenon Arc) No effectNEMA LD 3-2000 Method 3.3
Wear and CleanabilityPassesANSI Z124.3 & Z124.6
Stain ResistancePassesANSI Z124.3 & Z124.6
Fungus and Bacteria Resistance Does not support microbial growth ASTM G 21 & G 22
Boiling Water ResistanceNo visible changeNEMA LD 3-2000 Method 3.5
High Temperature Resistance No changeNEMA LD 3-2000 Method 3.6
Izod Impact (Notched Specimen) 0.28 ft.-lbs./in. of notchASTM D 256 (Method A)
Ball Impact ResistanceNo fracture—1⁄2 lb. ballNEMA LD 3-2000 Method 3.8
WeatherabilityΔE*94<5 in 1,000 hrs. ASTM G 155
Water AbsorptionLong-term 0.8% (1⁄4")ASTM D 570
Heat ReleasePass – OSU 65/65Part IV (g) [Amdt. 25-66]
Smoke DensityPassPart V (b) [Amdt. 25-66]
ToxicityPassPart V (b) [Amdt. 25-66]
Sixty Sec. VerticalPassF.A.R. 25.853 (a)
Density1.75 – 1.80 g/cm3 By Weight @ .06”x12”x12”
Color StabilityNo ChangeASTM G53/UVA 1000hrs
Abrasion Resistance 0.15ASTM D 4060
  • What is your warranty?
    Five years from installation.
  • How reparable is PolyStone?
    Very reparable. Repair kits will be supplied when necessary along with support to do the job.
  • Do you offer different nosing options?
    Our design limitations are few so many options are available.
  • Can PolyStone be used on vertical surfaces?
    Yes! Anything that can be molded can be made out of this product. Showers, table tops, drink ledges, credenzas and the list goes on and on . . .
  • Are there warpage issues?
    Absolutely not. Our process eliminates these issues.
  • What kind of information do you need to make a part?
    Templates and prints along with specifications for color and design.
  • What is your lead time?
    4 weeks from receipt of templates.
  • What is the recommended cleaning method?
    Gloss finish – Any spray cleaner.
    Matte finish – Scotchbrite pad or soft scrub cleanser.
Gallery
Technical Data
PolyStone Products Technical Information
PropertyTypical ResultTest
Tensile Strength6,000 psiASTM D 638
Tensile Modulus1.5 x 10^6 psiASTM D 638
Tensile Elongation0.4% min.ASTM D 638
Flexural Strength10,000 psiASTM D 790
Flexural Modulus1.2 x 10^6 psiASTM D 790
Hardness>85 56Rockwell “M” Scale ASTM D 785 Barcol Impressor ASTM D 2583
Thermal Expansion3.02 x 10-5 in./in./°C (1.80 x 10-5 in./in./°F)ASTM D 696
Gloss (60° Gardner) 5–75 (matte—highly polished)ANSI Z124
Light Resistance (Xenon Arc) No effectNEMA LD 3-2000 Method 3.3
Wear and CleanabilityPassesANSI Z124.3 & Z124.6
Stain ResistancePassesANSI Z124.3 & Z124.6
Fungus and Bacteria Resistance Does not support microbial growth ASTM G 21 & G 22
Boiling Water ResistanceNo visible changeNEMA LD 3-2000 Method 3.5
High Temperature Resistance No changeNEMA LD 3-2000 Method 3.6
Izod Impact (Notched Specimen) 0.28 ft.-lbs./in. of notchASTM D 256 (Method A)
Ball Impact ResistanceNo fracture—1⁄2 lb. ballNEMA LD 3-2000 Method 3.8
WeatherabilityΔE*94<5 in 1,000 hrs. ASTM G 155
Water AbsorptionLong-term 0.8% (1⁄4")ASTM D 570
Heat ReleasePass – OSU 65/65Part IV (g) [Amdt. 25-66]
Smoke DensityPassPart V (b) [Amdt. 25-66]
ToxicityPassPart V (b) [Amdt. 25-66]
Sixty Sec. VerticalPassF.A.R. 25.853 (a)
Density1.75 – 1.80 g/cm3 By Weight @ .06”x12”x12”
Color StabilityNo ChangeASTM G53/UVA 1000hrs
Abrasion Resistance 0.15ASTM D 4060
Color Library
FAQs
  • What is your warranty?
    Five years from installation.
  • How reparable is PolyStone?
    Very reparable. Repair kits will be supplied when necessary along with support to do the job.
  • Do you offer different nosing options?
    Our design limitations are few so many options are available.
  • Can PolyStone be used on vertical surfaces?
    Yes! Anything that can be molded can be made out of this product. Showers, table tops, drink ledges, credenzas and the list goes on and on . . .
  • Are there warpage issues?
    Absolutely not. Our process eliminates these issues.
  • What kind of information do you need to make a part?
    Templates and prints along with specifications for color and design.
  • What is your lead time?
    4 weeks from receipt of templates.
  • What is the recommended cleaning method?
    Gloss finish – Any spray cleaner.
    Matte finish – Scotchbrite pad or soft scrub cleanser.